How much does epoxy flooring cost in Tampa?
Most epoxy floors land between $4 and $10 per square foot installed, the range HomeGuide publishes for 2026. Angi’s Tampa page puts a typical local install at $2,179, with most jobs falling between $1,481 and $2,877. A real number for your floor takes an on-site look at the concrete first.
Our crew coats floors across Pinellas, Hillsborough and Pasco counties plus Sarasota, so the figures below cover the whole metro. If you are pricing epoxy flooring in Tampa, start with two things: the system you want and the shape your slab is in. A garage floor epoxy job prices differently than a lanai, a shop or a pool deck.
What does epoxy flooring cost per square foot by system?
The system sets most of the number. HomeGuide publishes $4 to $10 per square foot installed for epoxy flooring, and Angi’s 2026 data widens that to $2 to $12 across all types. Thin single-coat products sit at the bottom of both bands. Decorative and high-build systems sit at the top. Published rates by system:
| System | Published range per sq ft | Source |
|---|---|---|
| Thin epoxy paint, single coat | $2–$4 | Fixr |
| Epoxy flooring, all types installed | $2–$12 | Angi |
| Epoxy flooring, typical installed | $4–$10 | HomeGuide |
| Garage floor coating systems | $4–$12 | HomeGuide |
| Flake or custom color add-on | plus $0.50–$2.00 | HomeGuide |
| Quartz or stone epoxy | $3–$7 | Angi |
| Metallic epoxy | $5–$12 | Angi and Bob Vila |
| Polyaspartic | $5–$12 | HomeGuide |
| Polyurea | $5–$10 | HomeGuide |
| Thick, high-build epoxy | $10–$15 | Fixr |
| Commercial and industrial epoxy | $12 and up | HomeAdvisor |
A full-broadcast flake floor sits above plain solid color because it uses far more material: a pigmented base coat, flake broadcast until the floor stops taking it, a scrape, then a clear topcoat. HomeGuide prices flake and custom color work as a $0.50 to $2.00 per square foot add-on. For a shop or a showroom, commercial epoxy flooring runs higher again.
What do common job sizes cost in Tampa Bay?
The sizes people search most are a 12x12 room, a 20x20 floor, a two-car garage and 1,000 square feet. Every total below is computed from HomeGuide’s published $4 to $10 per square foot installed range. These are published market figures rather than our price list, and larger floors usually price lower per foot.
| Job | Sq ft | Computed range | Based on |
|---|---|---|---|
| 12x12 room | 144 | $576–$1,440 | HomeGuide $4–$10 per sq ft |
| 20x20 room or small 2-car garage | 400 | $1,600–$4,000 | HomeGuide $4–$10 per sq ft |
| Standard 2-car garage | 500 | $2,000–$5,000 | HomeGuide $4–$10 per sq ft |
| Lanai or covered patio | 300 | $1,200–$3,000 | HomeGuide $4–$10 per sq ft |
| 3-car garage | 750 | $3,000–$7,500 | HomeGuide $4–$10 per sq ft |
| Shop bay or small warehouse | 1,000 | $4,000–$10,000 | HomeGuide $4–$10 per sq ft |
Published totals line up closely with that math. HomeGuide lists $1,600 to $5,800 for a two-car garage, and HomeAdvisor lists $1,500 to $6,000 for a 500 square foot two-car floor. Thumbtack puts the most common epoxy garage floor at $2,370 nationally. For garage detail, read our breakdown of epoxy garage floor pricing in Florida, and for bigger square footage see what warehouse and commercial floors run.
What moves the price on a Tampa Bay slab?
Prep does, more than anything else. Angi puts labor at 33 to 60 percent of a professional epoxy job and Bob Vila puts it as high as 65 percent. On Tampa Bay concrete that labor line is mostly grinding and slab repair, plus the moisture work Florida adds. Six things move a quote up or down here:
- Slab age. Pinellas County’s median home was built in 1977 and Hillsborough’s in 1991, per the Census Bureau’s 2024 American Community Survey five-year estimates. Older slabs carry more cracking and spalling. Bob Vila puts concrete patching at $25 to $250 per repair and Fixr puts minor concrete repair at $3 to $5 per square foot.
- Moisture. Florida’s water table pushes vapor up through slabs, which is why we moisture test before quoting. Bob Vila notes a moisture barrier adds about $1 per square foot, and Fixr prices primer at $2 to $4 per square foot installed.
- What is already down. Old paint, failed coatings and tile glue all have to come off. Thumbtack prices a 400 to 450 square foot floor at $3.00 per square foot in fair shape and $3.25 per square foot when old epoxy has to be removed.
- Sun exposure. Outdoor slabs finish under a UV-stable polyaspartic or urethane topcoat, because plain epoxy ambers in direct sun. That extra layer is why a lanai floor coating or a deck prices above an interior room. Our Tampa pool deck resurfacing price guide covers that end of the market.
- Floor size. Thumbtack lists $3.00 per square foot at 400 to 450 square feet, $2.75 at 600 to 800, and $1.75 on a 10,000 square foot industrial floor. Setup and grinding cost about the same either way.
- Hot tires. Garage floors take hot-tire pickup, which pulls at a thin coating. That question changes the system spec rather than the square footage.
Does epoxy cost more in St. Petersburg, Clearwater or Sarasota?
No. Homeyou publishes the same $3 to $15 per square foot installed band for Tampa, St. Petersburg, Clearwater and Sarasota, so Tampa Bay prices as one market. What changes across the bay is the concrete under the coating.
Pinellas slabs skew older by median build year, so garages and lanais there more often need crack and spall repair before any coating goes down. Coastal humidity pushes more of those floors into moisture testing too. Sarasota work adds drive time, which shows up in scheduling rather than in the per-foot rate.
Is polyaspartic more expensive than epoxy?
Yes, generally by a couple of dollars per square foot. HomeGuide publishes polyaspartic at $5 to $12 per square foot against $4 to $10 for epoxy. Bob Vila lists polyaspartic at $4 to $9 per square foot, and Fixr prices polyaspartic sealers at $5 to $10 and polyurea at $3 to $10 per square foot.
Many Florida installs use both materials. Epoxy or a primer goes down first for bond, then a UV-stable polyaspartic or urethane takes the traffic and the sunlight on top. That layering is part of why an outdoor floor prices above a basement. Our polyaspartic coating price guide covers the tradeoff, and what a metallic pour runs in Florida covers the decorative end.
How should you compare epoxy quotes?
Read the prep and the film build before you read the bottom line. Ask how the slab gets profiled, how many coats go down, whether a moisture test is included, and what the topcoat is. Two numbers that sit $1,500 apart usually differ by a grinding pass and a coat.
Get the square footage written on the quote, since a per-foot rate is the only way to compare two bids fairly. Ask what happens to cracks and spalls, and whether that repair is inside the number or billed after. Ask for the cure timeline as well, because a floor you cannot park on for five days carries a real cost of its own.
When does a cheap quote cost more?
When prep gets skipped. A coating bonds to profiled concrete, so an acid wash in place of a diamond grind leaves a floor that peels in sheets. Fixr’s numbers show the math: resurfacing a failed floor runs $4 to $10 per square foot, on top of stripping off whatever went down the first time.
A few patterns show up again and again on Florida slabs. No moisture test, so vapor blisters the coating from underneath. Plain epoxy outdoors, which ambers in the sun within a season or two. A single thin coat sold as a full system. Old coating left in place under the new one. Our post on why coatings peel in Florida shows what each failure looks like.
Pricing a floor in Pinellas, Hillsborough, Pasco or Sarasota? Every quote we write starts at the slab. Call (727) 423-5985 and we will set up a free on-site look, measure the floor, run a moisture test and put a written number and a cure timeline in your hands. Phones are open 24/7. You can also browse every coating system we install.